We The group is focused on making all selection of normal roller chains and sprockets, gears & gearboxes, these kinds of as conveyor chain & sprockets , stainless metal chain, agricultural chain and has not just marketed its products all more than china, but also offered more than 65% goods to oversees, like Europe, The us, South-east Asia, and it also has established up storage logistics in areas like Europe. – EPG Team the biggest agricultural gearbox and pto factory in China with 5 various branches. For far more specifics: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
Plastic Agriculture Film Freshing Maintaining Movie Recycling Crushing Shredder
Descriptions
The DGS Common Purpose Single Shaft Shredder has a 457mm diameter profiled rotor created of reliable metal, working at a speed of 74rpm. The concave ground, intense 4-way rotating knives are mounted in the grooves of the profiled rotor with special knife holders. This enables a reduction of the reducing gap in between the counter knives and the rotor which assures a high stream fee, minimal power use and maximum output of shredded material.
The hydraulically operated ram feeds the substance routinely in the rotor’s slicing chamber by load-relevant controls. The hydraulic system is equipped with substantial-strain valves and volumetric flow controls which can be set according to the requirements of the input material.
Very strong pedestal bearing housings are mounted outside the equipment and independent to the reducing chamber to stop dust and grime penetrating into the outsized bearings. This assures a long services daily life and minimum service and routine maintenance.
Electricity is transmitted from the motor by a drive belt via an outsized gearbox which is located on the shaft conclude on one end of the rotor.
A basic safety switch stops device startup when the entrance panel is open up and the device attributes crisis quit buttons on the device physique and manage panel.
Specificatoins
| Item | Unit | SGS850 | DGS1200 | DGS1500 | DGS2000 | |
| Cutting Chamber | mm | 840*1570 | 1120*1570 | 1400*1570 | 1960*1570 | |
| Rotor Diameter | mm | 457 | 457 | 457 | 457 | |
| Rotor Speed | rpm | 74 | seventy four | seventy four | seventy four | |
| Motor Electrical power | kw | 37/45/55 | 55 | seventy five | two*55/2*seventy five | |
| Rotor Knives | pcs | 60 | eighty one | 102 | a hundred and forty four | |
| Stator Knives | pcs | two*3 | 2*four | two*five | 2*seven | |
| Hydraulic Ram Electrical power | kw | 3.seventy five | 5.6 | five.6 | 5.six | |
| Screen Size | mm | forty-a hundred | 40-one hundred | 40-one hundred | 40-a hundred | |
| Shredding Chamber Dimension | mm | 800*730 | 800*a thousand | 800*1290 | 800*1860 | |
| Dimensions | A | mm | 2300 | 2300 | 2300 | 2300 |
| B | mm | 1650 | 1650 | 1650 | 1650 | |
| C | mm | 540 | 540 | 540 | 540 | |
| D | mm | 660 | 660 | 660 | 660 | |
| E | mm | 2250 | 2250 | 2250 | 2250 | |
| F | mm | 250 | 250 | 250 | 250 | |
| G | mm | 2000 | 2280 | 2600 | 3720 | |
Structure
Characteristics
- Large diameter flat rotor
- Machined pocket knife holders
- Optional challenging going through – Concave floor sq. knives
- Robust ram construction
- Hefty responsibility manual bearings
- Common couplings
- Minimal velocity, higher torque geared travel
- Diminished footprint (when compared to horizontal pusher styles)
- Powerful hydraulic swing variety ram
- Bolt in drive shafts
- Oil cooling on ram and gearbox
- Two velocity hydraulic method
- Multiple rotor styles
- Ram comb plate
- Amp meter management
Choices
- Hydraulic monitor cradle
- Gearbox with shrink disc
- Rotor cooling
- Pipe spacer
- Touch monitor PLC Hopper mounted viewing mirror
- Increased motor travel
- Hydraulic push
Applitions
- PLASTICS
- RUBBER
- Wood
- BIOMASS
- PAPER
- Alternative FUELS (RDF/SRF)
- DOMESTIC & COMMERCIAL Waste
Certificates
All of our shredders and granulators have been approved CE certification.
Factory
Because its foundation DGM Recycling Techniques have been at the forefront of innovation and ept in the development of value successful and trustworthy recycling answers. As a wholly owned subsidiary of Wonder Automation Engineering Group, a pioneer in automation programs for the automotive and substance managing industries, DGM proceeds to try for excellence in the field of size reduction and recycling.
Suppliers
Packaging & Loading
1. Many levels of plastic wrapping movie and cardboard to shield metallic recycling device from dust and dampness.
2. Plastic pac ept strap belt to fasten wrapping movie and devices, also to fix equipment in containers.
3. Picket situation is utilized as the outside package and spare components by LCL, air or ept express.
four. Excellant logistic team to guarantee the shredder and granulators machines to be safely transported to buyer appointed loaction.
five. If you have any other request for the packaging or loading, we will try our best to meet up with your needs.
FAQ
Q1: Are you a ept organization or a factory ?
DGM is a factory with 10 a long time encounter in equipment producing, and 20 a long time encounter in German engineering.
Q2: Will you give pre-sale solutions?
DGM is composed of experienced experts, we will offer you a suitable answer in accordance client’s need in time.
Q3: Is your soon after-sales support exceptional?
At DGM we have a highly skilled crew of provider staff to manage all method of buyer provider enquiries. Whether it is replacement elements, technological support, or just basic procedure guidance we supply our clients real 24/7 help and following sale support.
We have an ept community which assures wherever you are in the ept you receive localized higher degree assist.
Our specialized crew has a long time of experience in the field of dimension reduction and recycling and we are on hand to offer support in installation, commissioning, personnel instruction and basic technical support.
This autumn: Where is your manufacturing unit?
Handle: No.1.Fengqi Road, Xihu (West Lake) Dis. District , HangZhou Town, ZheJiang Province, China
Q5: what is your make contact with informatoin?
Fax: +86 510 8357 5710
Phone: +86 510 8357 2002
Cell : +86 18762812155
Q6: Could we check out your manufacturing unit and take a look at the device?
We warmly welcome you to check out our manufacturing unit whenever,and we are quite happy to check our device with your raw materials.
The use of unique equipment manufacturer’s (OEM) element quantities or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating solution use and compatibility. Our organization and the outlined substitute components contained herein are not sponsored, approved, or manufactured by the OEM.
